Pyroelectric and RP Heads
Ophir
For Measuring Repetitive Energy Measurements - Ophir Optronics PE and RP Series of pyroelectric detectors combine high accuracy, high damage threshold and high repetition rate operation in a single head.
you can measure both long pulses up to 10mS and have a high repetition rate up to 4KHz in the same detector head. The pulsed detectors also provide sensitivity down to 100pJ .
Main Features:
- Built-in wavelength correction
- Spectral range from 0.15 to 20μm
- Pulse rate to 4000Hz (PE10 series)
- Energy measurement to 10pJ (PD10-pJ)
- Diffuser models for high energy YAG / Holmuim /Erbium lasers
- Versatility: Measurements of very long and very short pulses
- Measurement from nW to kW, μJ to 2000 μJ with appropriate heads
Energy Measurements -Pyroelectric Head 100mm
Ophir
Energy Measurements OPHIR PE10BB-DIF -Large aperture pyroelectric head with removable diffuser for high damage threshold.
- Energy measurement range from 1.2mJ à 40J per pulse
- Wavelength range from 190nm up to 20μm (190-2.5μm with diffuser)
This new head is ideally suited to test your pulse sources.
Photonics 
